Clarisea Smart Controller + PSU - All Models

Clarisea Smart Controller + PSU to suit all models.  

Smart Controller Buttons:

Play/Motor button  

Press and hold to manually advance the motor and roll on the fleece

Alarm button  

Press alarm button for 1-2 seconds to turn off audible alarm. Alarm condition will still be present with Red LED still flashing. The automatic advance of fleece will be disabled but the play button will still function as manual advance for the fleece.

Pressing the alarm button for 5-7 seconds will fully reset the controller, completely clearing the alarm state and resetting the unit into normal operation mode. Disconnecting power for 30 seconds will also reset the controller and clear the alarm state.  

Smart Controller LED Indicator Functions

Normal Operation  

Initialisation (Power on or reset):  

*Blue/Red LED will both flash 5 times, an audible alarm will sound with each flash if the smart controller is reset or powered on.

*Blue LED will remain on to show that the unit is in normal standby mode.

Motor Activation

When the motor is activated the Blue LED will flash

Alarm Indicators

The alarm will sound if the roll cannot advance, or the float is activated for more than 5 seconds.  

*Red alarm LED will flash  

*Audible alarm will sound for 2 seconds every 5 seconds  

*Automatic advance of fleece will be disabled until the controller is reset.

If the float is not activated for 8 hours, indicating the fleece is possibly empty.

*Blue/Red LED both flashing, audible alarm will sound for 1 second every 2 seconds  

*Automatic advance of fleece disabled until the controller is reset.

 If there is a possible installation error and the float is not triggered within 48 hours after initial set-up or reset.  

*Red LED will flash at 10 second intervals the audible alarm will sound with each flash  

*Automatic advance of fleece disabled until the controller is reset.